网上棋牌

Add to favorites
Hello, welcome to Weishu Machinery Technology (Shanghai) Co., Ltd.!
Promotion information classification:
All
Sort by default
release time
个结果 16 results
Hangzhou Boduo Industry & Trade Co., Ltd .-- fruit juice production line

Hangzhou Boduo Industry and Trade Co., Ltd .-- Juice Beverage Production Line [Introduction to the Process] 1. Raw materials are selected from fully ripe, fresh, good flavor, rich juice, and pest-free peach fruits. Peach fruits with insufficient maturity must be post-ripened. 2. Raw material pretreatment 1. Cleaning. After the raw materials are selected, they are washed and washed with clean water to remove the leeches, and then rinsed in 1% hydrochloric acid solution or detergent solution to remove residual pesticides, rinsed in clean water and drained. 2. Cut in half to remove the core. Use a half-cut nuclear machine. 3. Color protection by soaking. The raw material after half digging is put into 0.1%. Soak color in a mixed solution of ascorbic acid and citric acid. 3. Heating and beating The fruit pieces are heated at 90 ° C to 95 ° C for 3 to 5 minutes to promote softening. The pulp is beaten by a beater with an aperture of 0.5 mm to remove the peel. Fourth, flavor adjustment After processing the fruit pulp in order to increase the flavor needs to be adjusted. Add sugar, citric acid and L-ascorbic acid when adjusting. Its proportion is 100 kg of peach pulp, 80 kg of 27% sugar solution, 0.45 kg of citric acid, and 0.07-0.2 kg of L-ascorbic acid. V. Homogeneous degassing Homogenization is to make the pulp particles suspended in the juice break into smaller particles and evenly disperse in the juice to increase the stability of the juice and prevent delamination. The homogenization method is to pass the coarsely filtered fruit juice through a high-pressure homogenizer, so that the pulp particles and colloidal substances in the fruit juice pass through small holes with a diameter of 0.002 to 0.003 mm under high pressure to become finer particles. Generally, 130-160 kg / cm2 homogenizer is used in production. A colloid mill can also be used for homogenization. When the juice flows through the slit with a colloid mill gap of 0.05-0.075 mm, the pulp particles in the juice are impacted and rubbed against each other due to the strong centrifugal force, thereby achieving the purpose of homogeneity. The fruit enters the gas such as oxygen, nitrogen, and carbon dioxide during juice extraction. Among them, nitrogen can cause oxidation of vitamin C and pigments and corrosion of tinplate. Therefore, degassing must be performed. There are two main methods of degassing: 1 And vacuum method. Fill the juice into a vacuum container and let the juice spray out in a mist form to degas. The emptiness obtained by the direct air method is 685-711 mm Hg or higher, and the temperature is lower than 43 ° C. 2. Nitrogen exchange method. Juice flows from the top of an upright glass or stainless steel tube, and nitrogen gas is pushed in from the bottom of the tube. After adding nitrogen, numerous small bubbles are formed in the fruit juice, which replaces the oxygen in the fruit juice and achieves the purpose of degassing. Six, sterilization canning The fruit juice is heated to 95 ° C for 1 minute, and canned immediately while it is hot. 7. Sealing and cooling Tighten the bottle cap tightly and invert the jar for one minute. After sealing, it should be cooled down to about 38 ℃ quickly and then stored in the warehouse. Qualified fruit tea products are pink or yellow-brown, with a dark red color allowed; the juice is evenly turbid, with particulate precipitation after standing for a long time; peach juice flavor, no odor; soluble solids of 10% -14%

Zhejiang angel biological Co., Ltd .-- Cordyceps militaris extract drink

Zhejiang Angel Biological Co., Ltd .-- Cordyceps Militaris Beverage Extract [Introduction to Technology] 1. Raw materials are selected from fully ripe, fresh, good flavor, rich juice, and disease and pest-free peach fruit. Peach fruit with insufficient maturity must undergo ripening. 2. Raw material pretreatment 1. Cleaning. After the raw materials are selected, they are washed and washed with clean water to remove the leeches, and then rinsed in 1% hydrochloric acid solution or detergent solution to remove residual pesticides, rinsed in clean water, and drained. 2. Cut in half to remove the core. Use a half-cut nuclear machine. 3. Color protection by soaking. The raw material after half digging is put into 0.1%. Soak color in a mixed solution of ascorbic acid and citric acid. 3. Heating and beating The fruit pieces are heated at 90 ° C to 95 ° C for 3 to 5 minutes to promote softening. The pulp is beaten by a beater with an aperture of 0.5 mm to remove the peel. Fourth, flavor adjustment After processing the fruit pulp in order to increase the flavor needs to be adjusted. Add sugar, citric acid and L-ascorbic acid when adjusting. Its proportion is 100 kg of peach pulp, 80 kg of 27% sugar solution, 0.45 kg of citric acid, and 0.07-0.2 kg of L-ascorbic acid. V. Homogeneous degassing Homogenization is to make the pulp particles suspended in the juice break into smaller particles and evenly disperse in the juice to increase the stability of the juice and prevent delamination. The homogenization method is to pass the coarsely filtered fruit juice through a high-pressure homogenizer, so that the pulp particles and colloidal substances in the fruit juice pass through small holes with a diameter of 0.002 to 0.003 mm under high pressure to become finer particles. Generally, 130-160 kg / cm2 homogenizer is used in production. A colloid mill can also be used for homogenization. When the juice flows through the slit with a colloid mill gap of 0.05-0.075 mm, the pulp particles in the juice are impacted and rubbed against each other due to the strong centrifugal force, thereby achieving the purpose of homogeneity. The fruit enters the gas such as oxygen, nitrogen and carbon dioxide during juice extraction. Among them, nitrogen can cause oxidation of vitamin C and pigments and corrosion of tinplate. Therefore, degassing must be performed. There are two main methods of degassing: And vacuum method. Fill the juice into a vacuum container and let the juice spray out in a mist form to degas. The emptiness obtained by the direct air method is 685-711 mm Hg or higher, and the temperature is lower than 43 ° C. 2. Nitrogen exchange method. Juice flows from the top of an upright glass or stainless steel tube, and nitrogen gas is pushed in from the bottom of the tube. After adding nitrogen, numerous small bubbles are formed in the fruit juice, which replaces the oxygen in the fruit juice and achieves the purpose of degassing. Six, sterilization canning The fruit juice is heated to 95 ° C for 1 minute, and canned immediately while it is hot. 7. Sealing and cooling Tighten the bottle cap tightly and invert the jar for one minute. After sealing, it should be cooled down to about 38 ℃ quickly and then stored in the warehouse. Qualified fruit tea products are pink or yellow-brown, with a dark red color allowed; the juice is evenly turbid, with particulate precipitation after standing for a long time; peach juice flavor, no odor; soluble solids of 10% to 14%

Nigeria Brothers Co., Ltd. --- Brother Fruit Juice Drink Production Line

Nigeria Brothers Co., Ltd .--- Brother Juice Beverage Production Line [Introduction to the Process] 1. Raw materials are selected from fully ripe, fresh, good flavor, rich juice, and pest-free peach fruits. Peach fruits with insufficient maturity must undergo ripening. 2. Raw material pretreatment 1. Cleaning. After the raw materials are selected, they are washed and washed with clean water to remove the leeches, and then rinsed in 1% hydrochloric acid solution or detergent solution to remove residual pesticides, rinsed in clean water, and drained. 2. Cut in half to remove the core. Use a half-cut nuclear machine. 3. Color protection by soaking. The raw material after half digging is put into 0.1%. Soak color in a mixed solution of ascorbic acid and citric acid. 3. Heating and beating The fruit pieces are heated at 90 ° C to 95 ° C for 3 to 5 minutes to promote softening. The pulp is beaten by a beater with an aperture of 0.5 mm to remove the peel. Fourth, flavor adjustment After processing the fruit pulp in order to increase the flavor needs to be adjusted. Add sugar, citric acid and L-ascorbic acid when adjusting. Its proportion is 100 kg of peach pulp, 80 kg of 27% sugar solution, 0.45 kg of citric acid, and 0.07-0.2 kg of L-ascorbic acid. V. Homogeneous degassing Homogenization is to make the pulp particles suspended in the juice break into smaller particles and evenly disperse in the juice to increase the stability of the juice and prevent delamination. The homogenization method is to pass the coarsely filtered fruit juice through a high-pressure homogenizer, so that the pulp particles and colloidal substances in the fruit juice pass through small holes with a diameter of 0.002 to 0.003 mm under high pressure to become finer particles. Generally, 130-160 kg / cm2 homogenizer is used in production. A colloid mill can also be used for homogenization. When the juice flows through the slit with a colloid mill gap of 0.05-0.075 mm, the pulp particles in the juice are impacted and rubbed against each other due to the strong centrifugal force, thereby achieving the purpose of homogeneity. The fruit enters the gas such as oxygen, nitrogen, and carbon dioxide during juice extraction. Among them, nitrogen can cause oxidation of vitamin C and pigments and corrosion of tinplate. Therefore, degassing must be performed. There are two main methods of degassing: 1 And vacuum method. Fill the juice into a vacuum container and let the juice spray out in a mist form to degas. The emptiness obtained by the direct air method is 685-711 mm Hg or higher, and the temperature is lower than 43 ° C. 2. Nitrogen exchange method. Juice flows from the top of an upright glass or stainless steel tube, and nitrogen gas is pushed in from the bottom of the tube. After adding nitrogen, numerous small bubbles are formed in the fruit juice, which replaces the oxygen in the fruit juice and achieves the purpose of degassing. Six, sterilization canning The fruit juice is heated to 95 ° C for 1 minute, and canned immediately while it is hot. 7. Sealing and cooling Tighten the bottle cap tightly and invert the jar for one minute. After sealing, it should be cooled down to about 38 ℃ quickly and then stored in the warehouse. Qualified fruit tea products are pink or yellow-brown, with a dark red color allowed; the juice is evenly turbid, with particulate precipitation after standing for a long time; peach juice flavor, no odor; soluble solids of 10% -14%

15,000 bottles of purified water production line per hour in Malaysia

15,000 bottles of pure water production line per hour in Malaysia [Introduction to the process] 1. Raw materials are selected from fully ripe, fresh, good flavor, rich juice, and pest-free peach fruits. Peach fruits with insufficient maturity must undergo ripening. 2. Raw material pretreatment 1. Cleaning. After the raw materials are selected, they are washed and washed with clean water to remove the leeches, and then rinsed in 1% hydrochloric acid solution or detergent solution to remove residual pesticides, rinsed in clean water, and drained. 2. Cut in half to remove the core. Use a half-cut nuclear machine. 3. Color protection by soaking. The raw material after half digging is put into 0.1%. Soak color in a mixed solution of ascorbic acid and citric acid. 3. Heating and beating The fruit pieces are heated at 90 ° C to 95 ° C for 3 to 5 minutes to promote softening. The pulp is beaten by a beater with an aperture of 0.5 mm to remove the peel. Fourth, flavor adjustment After processing the fruit pulp in order to increase the flavor needs to be adjusted. Add sugar, citric acid and L-ascorbic acid when adjusting. Its proportion is 100 kg of peach pulp, 80 kg of 27% sugar solution, 0.45 kg of citric acid, and 0.07-0.2 kg of L-ascorbic acid. V. Homogeneous degassing Homogenization is to make the pulp particles suspended in the juice break into smaller particles and evenly disperse in the juice to increase the stability of the juice and prevent delamination. The homogenization method is to pass the coarsely filtered fruit juice through a high-pressure homogenizer, so that the pulp particles and colloidal substances in the fruit juice pass through small holes with a diameter of 0.002 to 0.003 mm under high pressure to become finer particles. Generally, 130-160 kg / cm2 homogenizer is used in production. A colloid mill can also be used for homogenization. When the juice flows through the slit with a colloid mill gap of 0.05-0.075 mm, the pulp particles in the juice are impacted and rubbed against each other due to the strong centrifugal force, thereby achieving the purpose of homogeneity. The fruit enters the gas such as oxygen, nitrogen, and carbon dioxide during juice extraction. Among them, nitrogen can cause oxidation of vitamin C and pigments and corrosion of tinplate. Therefore, degassing must be performed. There are two main methods of degassing: 1 And vacuum method. Fill the juice into a vacuum container and let the juice spray out in a mist form to degas. The emptiness obtained by the direct air method is 685-711 mm Hg or higher, and the temperature is lower than 43 ° C. 2. Nitrogen exchange method. Juice flows from the top of an upright glass or stainless steel tube, and nitrogen gas is pushed in from the bottom of the tube. After adding nitrogen, numerous small bubbles are formed in the fruit juice, which replaces the oxygen in the fruit juice and achieves the purpose of degassing. Six, sterilization canning The fruit juice is heated to 95 ° C for 1 minute, and canned immediately while it is hot. 7. Sealing and cooling Tighten the bottle cap tightly and invert the jar for one minute. After sealing, it should be cooled down to about 38 ℃ quickly and then stored in the warehouse. Qualified fruit tea products are pink or yellow-brown, with a dark red color allowed; the juice is evenly turbid, with particulate precipitation after standing for a long time; peach juice flavor, no odor; soluble solids of 10% to 14%

Wuhan Lingxing Group Fermented Egg Milk Production Line

Wuhan Lingxing Group Fermented Egg Milk Production Line 6000P / H [Introduction to the Process] 1. The raw materials are selected from fully ripe, fresh, good flavor, rich juice, and disease and pest-free peach fruits. Peach fruits with insufficient maturity must undergo post-ripening. 2. Raw material pretreatment 1. Cleaning. After the raw materials are selected, they are washed and washed with clean water to remove the leeches, and then rinsed in 1% hydrochloric acid solution or detergent solution to remove residual pesticides, rinsed in clean water, and drained. 2. Cut in half to remove the core. Use a half-cut nuclear machine. 3. Color protection by soaking. The raw material after half digging is put into 0.1%. Soak color in a mixed solution of ascorbic acid and citric acid. 3. Heating and beating The fruit pieces are heated at 90 ° C to 95 ° C for 3 to 5 minutes to promote softening. The pulp is beaten by a beater with an aperture of 0.5 mm to remove the peel. Fourth, flavor adjustment After processing the fruit pulp in order to increase the flavor needs to be adjusted. Add sugar, citric acid and L-ascorbic acid when adjusting. Its proportion is 100 kg of peach pulp, 80 kg of 27% sugar solution, 0.45 kg of citric acid, and 0.07-0.2 kg of L-ascorbic acid. V. Homogeneous degassing Homogenization is to make the pulp particles suspended in the juice break into smaller particles and evenly disperse in the juice to increase the stability of the juice and prevent delamination. The homogenization method is to pass the coarsely filtered fruit juice through a high-pressure homogenizer, so that the pulp particles and colloidal substances in the fruit juice pass through small holes with a diameter of 0.002 to 0.003 mm under high pressure to become finer particles. Generally, 130-160 kg / cm2 homogenizer is used in production. A colloid mill can also be used for homogenization. When the juice flows through the slit with a colloid mill gap of 0.05-0.075 mm, the pulp particles in the juice are impacted and rubbed against each other due to the strong centrifugal force, thereby achieving the purpose of homogeneity. The fruit enters the gas such as oxygen, nitrogen and carbon dioxide during juice extraction. Among them, nitrogen can cause the oxidation of vitamin C and pigments and the corrosion of tinplate. Therefore, degassing must be performed. There are two main methods of degassing: 1 And vacuum method. Fill the juice into a vacuum container and let the juice spray out in a mist form to degas. The emptiness obtained by the direct air method is 685-711 mm Hg or higher, and the temperature is lower than 43 ° C. 2. Nitrogen exchange method. Juice flows from the top of an upright glass or stainless steel tube, and nitrogen gas is pushed in from the bottom of the tube. After adding nitrogen, numerous small bubbles are formed in the fruit juice, which replaces the oxygen in the fruit juice and achieves the purpose of degassing. Six, sterilization canning The fruit juice is heated to 95 ° C for 1 minute, and canned immediately while it is hot. 7. Sealing and cooling Tighten the bottle cap tightly and invert the jar for one minute. After sealing, it should be cooled down to about 38 ℃ quickly and then stored in the warehouse. Qualified fruit tea products are pink or yellow-brown, with a dark red color allowed; the juice is evenly turbid, with particulate precipitation after standing for a long time; peach juice flavor, no odor; soluble solids of 10% -14%

Zhejiang Yiming Group--Bus Milk Production Line

Pasteurized milk production line milk lactic acid bacteria fermented beverage and production method thereof. Fresh milk is used as raw material, and defatted powder, citric acid, sugar, hydroxymethyl cellulose, etc. are reasonably added and refined by a new lactic acid bacteria fermentation process. Milk acquisition, cooling storage, clean milk, homogenization, sterilization, milk storage, strain addition, fermentation, stirring, filling, storage, inspection, delivery, etc. The products produced by this method are rich in nutrients and easy to promote digestion and absorption . Traditional lactic acid bacteria fermentation beverages are mainly made from milk. Compared with cow's milk protein, China's plant protein resources are more abundant, and it has a complementary role in amino acid composition. Plant protein instead of animal protein to produce lactic acid bacteria fermented beverages has broad market prospects. The purpose of this study was to develop a plant protein fermentation beverage using walnut meal as a by-product of walnut oil as a by-product. According to physical and chemical indexes, microbial indexes and sensory indexes, the effects of different process conditions on the quality of fermented beverages of peach lactic acid bacteria were studied, the technological conditions were optimized, and the antioxidant activity of walnut fermented beverages prepared by the ** process was tested. The main results are as follows: 1. Preparation of walnut milk fermentation stock solution: The sensory state of walnut milk is best after the walnut meal is blanched in 95 ° C water for 4 minutes before beating. When the walnut meal pulping water ratio is 1:10, the sensory characteristics of walnut milk are: The state is best; the dissolution rate of walnut protein at 80 ° C is **, which is the best beat temperature. 2. Domestication of bacteria: After the domestication of lactic acid bacteria by progressive domestication, the acid production ability and growth of pure lactobacillus were improved. When acclimated to the 9th generation, the acid production reached 69 ° T, which was 50% higher than that before acclimation and reached 2.9 × 107 cells / mL, which was about 17 times higher than that before acclimation. 3. Study on the stability of walnut milk: Under the sterilization condition of 65 ℃ and 25min, the flavor and color of walnut milk are more suitable and the stability is higher, which is the best sterilization condition; compared with sucrose compared with CMC-Na and carrageenan Esters have a stabilizing effect on walnut milk, and the appropriate addition amount is 0.3%. 4. Research on fermentation process: Taking the acidity and the number of viable lactic acid bacteria as indicators to comprehensively consider the sensory status, the effects of four factors, such as inoculation amount, fermentation temperature, fermentation time, and sucrose addition amount, on the quality of fermented walnut milk were studied. Based on orthogonal optimization, the optimized process was obtained: the inoculation amount was 3%, the fermentation temperature was 37 ° C, the fermentation time was 10 hours, and the sucrose addition amount was 5%. 5. Antioxidant activity study: The walnut lactic acid bacteria fermented beverage (C = 0.988g / mL) obtained under the process has obvious antioxidant activity, and the antioxidant capacity has a linear relationship with its dilution concentration, DPPH clearance, OH · clearance The rate and total antioxidant capacity were equivalent to ascorbic acid solutions at concentrations of 0.463 mg / mL, 6.32 mg / mL, and 0.212 mg / mL, respectively. * New Recommendation HomeAbout Weishu Product Center Beverage Production Line Project Case Solutions News Feedback Contact Us Copyright © Weishu Machinery Technology (Shanghai) Co., Ltd. Website construction provided by Danlu.com Login Terms of Use

  • QQ Consulting
  • QQ QQ
  • QQ QQ
  • Telephone consultation
  • 17321252705
  • 15079107852
  • 15800450161
  • 021-58447276
  • 021-58420116