网上棋牌

Add to favorites
Hello, welcome to Weishu Machinery Technology (Shanghai) Co., Ltd.!
Sort by default
release time
个结果 10 results
1000L batching tank

The mixing tank is also known as the mixing tank and the mixing barrel. It has a three-layer structure with an upper opening and a lower inclined bottom. It has the functions of heating and automatic temperature control, heat preservation, and stirring. It has the advantages of fast heat transfer, large temperature difference, and convenient cleaning. . Widely used in food (dairy), pharmaceutical, daily chemical, beverage, oil, chemical, pigment and other industries as intermediate buffering, liquid storage, mixing, and blending equipment (under the condition that the material can be adjusted uniformly without heating, the equipment For * economical and practical), heating, mixing or sterilization. It is especially suitable for pilot and small-scale use of units and scientific research institutions without steam heat sources. According to the needs of the process, a fully enclosed structure and a thermal insulation structure can be adopted. [Feeding tank function] The liquid distribution tank is heated by steam in the jacket, and the heat is transferred to the material through the inner wall of the tank to maintain the required temperature. At the same time, the magnetic stirrer is used to continuously rotate the material to achieve the medicinal solution. Mix evenly for the purpose. It has the characteristics of energy saving, corrosion resistance, strong production capacity, convenient cleaning, simple structure, etc. It is an indispensable device for manufacturing dairy, beverage and pharmaceutical manufacturers. The structure of the batching tank This equipment consists of a tank body, a jacket, an inner liner, a head, a magnetic stirring device and a public system pipeline. The main material is imported stainless steel, which is carried out in accordance with the technical conditions of GB741-80. The tank is polished inside and outside. There are stirring paddles in the tank, which play the role of stirring during operation. , Drive the stirring paddle; can be disassembled and cleaned, and is an openable tank lid for cleaning, plus two feeding ports, which can be connected to the pipeline to facilitate the connection of a variety of ingredients, with discharge below And install the plug valve, etc. After mixing well, rotate the handle of the plug valve 90 ° to discharge the material, and close it after discharging, to achieve the purpose of uniform mixing; can be equipped with a level gauge or weighing equipment to the material in the tank Volume or weight is measured. Online CIP cleaning (only for fully enclosed structures). Designed in accordance with sanitary requirements, the structure design is ** humanized and easy to operate. Smooth transmission and low noise. Appropriate diameter-to-height ratio design, customized mixing device as required, good mixing and mixing effect. The inner surface of the tank is mirror polished (roughness Ra≤0.4 & micro; m); the process openings of the inlet and outlet nozzles, sight glasses, manholes, etc. are welded with the arc transition of the welding process of the tank body, which is smooth and easy to clean. No dead ends, ensuring the reliability and stability of the production process, and complying with the "cGMP" and other specifications. [Several types of ingredient tanks] Upper movable cover, lower inclined bottom structure, upper movable cover, lower cone bottom (or oval, butterfly head) structure, upper and lower tapered head structure (closed), upper and lower ellipse (or butterfly) ) Head knot [Main technical and structural performance of the batching tank] 1. Tank volume: 50L, 100L, 200L, 300L, 500L, 600L, 1000L ~ 5000L. 2. Heating method: The electric heating rod is inserted into the jacket, and the heating is even and there is no cold zone. Heat-conducting oil or water is injected into the jacket as a heating medium, which generates heat to heat the materials in the tank. 3. Material heating temperature: ≤350 ℃; material heating time: 20min ~ 90min (depending on the process needs). 4. Temperature control: Use a thermocouple to measure the temperature and connect it with a temperature controller to measure and control the temperature (temperature difference ± 1 ° C), and adjust the temperature of the material. The temperature controller is installed in the electric control box, and the temperature transmission rod is directly inserted into the bottom of the tank, so that the liquid can be used to indicate the temperature. 5. Tank body: The inner surface is mirror polished, and the roughness Ra≤0.4μm. 6. Upper cover: Two openable movable covers, easy to clean, mirror-polished inner and outer surfaces (roughness Ra≤0.4μm). 7. Internal tank bottom structure: It is processed into R angle by spinning, and there is no dead angle after welding and polishing with the internal tank body, and it is inclined at 5 ° toward the discharge port, which is convenient for discharging the materials without stagnation. 8. Jacket form: full jacket, used to add heat-conducting oil or water, to achieve the best temperature rise and cool down during work. 9. Insulation material: It is filled with pearl cotton, rock wool or polyurethane, which can keep the temperature difference with the outside world to achieve the effect of heat insulation. 10. Outer shell surface treatment: mirror-polished or 2B primary color matte or 2B matte surface. 11. Stirring device: the top center is stirred, and the reducer output shaft and the stirring paddle shaft are connected by a loose sleeve, which is convenient for disassembly and cleaning. 12. Stirring speed: 15 ~ 120r / min (constant speed); Type of stirring paddle: frame type, anchor type, paddle type, turbine type, etc. (according to process requirements). 13. Equipment configuration: electrical control box, thermometer, material liquid inlet and outlet, medium inlet and outlet (inlet and drain), vent (oil spill hole), etc. 14. Material: inner tank SUS304 or SUS316L; jacket is Q235-B or SUS304; outer protective shell is SUS304. 15. The process openings of the inlet and outlet pipe openings and the weld of the inner tank adopt a flanging process and arc transition , Smooth and easy to clean without dead ends, beautiful appearance. Capacity (L) 300L500L800L1000L Vacuum degree (MPa) <-0.09 <-0.09 <-0.09 <-0.09 Working pressure (MPa) Normal pressure and normal pressure Normal pressure and normal pressure Working temperature (℃) 0 ~ 1000 ~ 1000 ~ 1000 ~ 100 Motor Power (KW) 345.55.5 Stirring speed (r / min) 35-5135-5135-5135-51 Dimensions (mm) Φ1100 X2050Φ1200 X2390Φ1400 X2650Φ1500 X2750

1000L batching tank

The mixing tank is also known as the mixing tank and the mixing barrel. It has a three-layer structure with an upper opening and a lower inclined bottom. It has the functions of heating and automatic temperature control, heat preservation, and stirring. It has the advantages of fast heat transfer, large temperature difference, and convenient cleaning. . Widely used in food (dairy), pharmaceutical, daily chemical, beverage, oil, chemical, pigment and other industries as intermediate buffering, liquid storage, mixing, and blending equipment (under the condition that the material can be adjusted uniformly without heating, the equipment For * economical and practical), heating, mixing or sterilization. It is especially suitable for pilot and small-scale use of units and scientific research institutions without steam heat sources. According to the needs of the process, a fully enclosed structure and a thermal insulation structure can be adopted. [Dosing tank function] The liquid distribution tank is heated by steam in the jacket, and the heat is transferred to the material through the inner wall of the tank to maintain the required temperature. Mix evenly for the purpose. It has the characteristics of energy saving, corrosion resistance, strong production capacity, convenient cleaning, simple structure, etc. It is an indispensable device for manufacturing dairy, beverage and pharmaceutical manufacturers. The structure of the batching tank This equipment consists of a tank body, a jacket, an inner liner, a head, a magnetic stirring device and a public system pipeline. The main material is imported stainless steel, which is carried out in accordance with the technical conditions of GB741-80. The tank is polished inside and outside. There are stirring paddles in the tank, which play the role of stirring during operation. , Drive the stirring paddle; can be disassembled and cleaned, and is an openable tank lid for cleaning, plus two feeding ports, which can be connected to the pipeline to facilitate the connection of a variety of ingredients, with discharge below And install the plug valve, etc. After mixing well, rotate the handle of the plug valve 90 ° to discharge the material, and close it after discharging, to achieve the purpose of uniform mixing; can be equipped with a level gauge or weighing equipment to the material in the tank Volume or weight is measured. Online CIP cleaning (only for fully enclosed structures). Designed in accordance with sanitary requirements, the structure design is ** humanized and easy to operate. Smooth transmission and low noise. Appropriate diameter-to-height ratio design, customized mixing device as required, good mixing and mixing effect. The inner surface of the tank is mirror polished (roughness Ra≤0.4 & micro; m); the process openings of the inlet and outlet nozzles, sight glasses, manholes, etc. are welded with the arc transition of the welding process of the tank body, which is smooth and easy to clean. No dead ends, ensuring the reliability and stability of the production process, and complying with the "cGMP" and other specifications. [Several types of ingredient tanks] Upper movable cover, lower inclined bottom structure, upper movable cover, lower cone bottom (or oval, butterfly head) structure, upper and lower tapered head structure (closed), upper and lower ellipse (or butterfly) ) Head knot [Main technical and structural performance of the batching tank] 1. Tank volume: 50L, 100L, 200L, 300L, 500L, 600L, 1000L ~ 5000L. 2. Heating method: The electric heating rod is inserted into the jacket, and the heating is even and there is no cold zone. Heat-conducting oil or water is injected into the jacket as a heating medium, which generates heat to heat the materials in the tank. 3. Material heating temperature: ≤350 ℃; material heating time: 20min ~ 90min (depending on the process needs). 4. Temperature control: Use a thermocouple to measure the temperature and connect it with a temperature controller to measure and control the temperature (temperature difference ± 1 ° C), and adjust the temperature of the material. The temperature controller is installed in the electric control box, and the temperature transmission rod is directly inserted into the bottom of the tank, so that the liquid can be used to indicate the temperature. 5. Tank body: The inner surface is mirror polished, and the roughness Ra≤0.4μm. 6. Upper cover: Two openable movable covers, easy to clean, mirror-polished inner and outer surfaces (roughness Ra≤0.4μm). 7. Internal tank bottom structure: It is processed into R angle by spinning, and there is no dead angle after welding and polishing with the internal tank body, and it is inclined at 5 ° toward the discharge port, which is convenient for discharging the materials without stagnation. 8. Jacket form: full jacket, used to add heat-conducting oil or water, to achieve the best temperature rise and cool down during work. 9. Insulation material: It is filled with pearl cotton, rock wool or polyurethane, which can keep the temperature difference with the outside world to achieve the effect of heat insulation. 10. Outer shell surface treatment: mirror-polished or 2B primary color matte or 2B matte surface. 11. Stirring device: the top center is stirred, and the reducer output shaft and the stirring paddle shaft are connected by a loose sleeve, which is convenient for disassembly and cleaning. 12. Stirring speed: 15 ~ 120r / min (constant speed); Type of stirring paddle: frame type, anchor type, paddle type, turbine type, etc. (according to process requirements). 13. Equipment configuration: electrical control box, thermometer, material liquid inlet and outlet, medium inlet and outlet (inlet and drain), vent (oil spill hole), etc. 14. Material: inner tank SUS304 or SUS316L; jacket is Q235-B or SUS304; outer protective shell is SUS304. 15. The process openings of the inlet and outlet pipe openings and the weld of the inner tank adopt a flanging process and arc transition. , Smooth and easy to clean without dead ends, beautiful appearance. Capacity (L) 300L500L800L1000L Vacuum degree (MPa) <-0.09 <-0.09 <-0.09 <-0.09 Working pressure (MPa) Normal pressure and normal pressure Normal pressure and normal pressure Working temperature (℃) 0 ~ 1000 ~ 1000 ~ 1000 ~ 100 Motor Power (KW) 345.55.5 Stirring speed (r / min) 35-5135-5135-5135-51 Dimensions (mm) Φ1100 X2050Φ1200 X2390Φ1400 X2650Φ1500 X2750

Ingredients tank

I. Fermentation tank characteristics: Fermentation tanks (also known as fully enclosed cold and hot cylinders), which have the advantages of energy saving, noise reduction, corrosion resistance, strong production capacity, easy cleaning, etc., are widely used in the dairy industry, food, pharmaceuticals, chemicals, beverages And other industrial sectors, as necessary equipment for heating, cooling, heat preservation, sterilization treatment or storage of slurry, especially pasteurization and insulation of milk, are necessary equipment for ice cream production lines. Fermentation tank is a kind of equipment for mechanical stirring and fermentation of materials. The equipment uses an internal circulation form, which uses agitating pulp to disperse and break up the bubbles. It has a high rate of dissolved oxygen and good mixing effect. It is widely used in the fermentation of materials in the pharmaceutical, chemical and food industries. The material is made of high-quality stainless steel. The inner surface is mirror polished Ra≤0.28μm, and the outer surface is matt, mirror, sandblasted or cold rolled. Fermentation tanks are produced in strict accordance with Articles 31 and 32 of Chapter IV of the GMP General Regulations of the "Good Manufacturing Practice for Drugs" (1998 revision). The products have the characteristics of excellent quality, high production efficiency, and so on. Fermentation tank refers to the device used in industry for microbial fermentation. Its main body is generally a main cylinder made of stainless steel plate with a volume of 1m3 to several hundred m3. In the design and processing, attention should be paid to the tight and reasonable structure. Can withstand steam sterilization, have certain operating flexibility, minimize internal accessories (avoid dead spots), strong material and energy transfer performance, and can be adjusted to facilitate cleaning and reduce pollution, suitable for the production of multiple products and reducing energy Consume. 2. Scope of application of fermentation tank: It is mainly used for fermentation of wine, beverage and various ingredients, and it is an indispensable fermentation equipment for manufacturing alcohol and beverage. Different fermentation tanks are required according to the different fermentation requirements of wine and fruit wine. Water-cooled refrigeration unit, plate sterilizer / tubular sterilizer, fermentation tank, freezing tank, wine storage tank, water treatment system and other groups of wine fermentation storage system. Third, the basic configuration of the fermentation tank: made of SUS304 or SUS316 imported materials; installed aseptic breathing stomata or aseptic positive pressure fermentation system; equipped with Milo board (Miller board) or labyrinth jacket, can be heated or Cooling medium for cyclic heating or cooling; the top plate is equipped with a control sensor (* commonly used PH electrode and DO dissolved oxygen electrode) to monitor and control the fermentation conditions; the top is equipped with a planetary balance gear reducer (multi-stage or without Level variable speed), to drive the stirring paddle; the top is equipped with a cleaning device, a respirator, and a feed port, which can be connected to the pipeline to facilitate the connection of various ingredients; the bottom is equipped with a discharge port, which is closed immediately after discharging, to achieve uniform mixing ; The bottom is equipped with a ventilated gas distributor for the air or oxygen required for the growth of bacteria; other auxiliary devices of the serpentine circulation cooling equipment are as follows: mixer; inlet and outlet; cold and hot water inlet and outlet; Manholes; thermometers; liquid level indicators; high and low level alarms; anti-fly and dust-proof breathing stomata; aseptic sampling ports; gauges; CIP cleaning sprinklers; aseptic air filters; ;

Blending tank

The mixing tank is also known as the mixing tank and the mixing barrel. It has a three-layer structure with an upper opening and a lower inclined bottom. It has the functions of heating and automatic temperature control, heat preservation, and stirring. It has the advantages of fast heat transfer, large temperature difference, and convenient cleaning. . Widely used in food (dairy), pharmaceutical, daily chemical, beverage, oil, chemical, pigment and other industries as intermediate buffering, liquid storage, mixing, and blending equipment (under the condition that the material can be adjusted uniformly without heating, the equipment For * economical and practical), heating, mixing or sterilization. It is especially suitable for pilot and small-scale use of units and scientific research institutions without steam heat sources. According to the needs of the process, a fully enclosed structure and a thermal insulation structure can be adopted. [Feeding tank function] The liquid distribution tank is heated by steam in the jacket, and the heat is transferred to the material through the inner wall of the tank to maintain the required temperature. At the same time, the magnetic stirrer is used to continuously rotate the material to achieve the medicinal solution. Mix evenly for the purpose. It has the characteristics of energy saving, corrosion resistance, strong production capacity, convenient cleaning, simple structure, etc. It is an indispensable device for manufacturing dairy, beverage and pharmaceutical manufacturers. The structure of the batching tank This equipment consists of a tank body, a jacket, an inner liner, a head, a magnetic stirring device and a public system pipeline. The main material is imported stainless steel, which is carried out in accordance with the technical conditions of GB741-80. The tank is polished inside and outside. There are stirring paddles in the tank, which play the role of stirring during operation. The thermometer is on the cover to display the temperature inside the tank. , Drive the stirring paddle; can be disassembled and cleaned, and is an openable tank lid for cleaning, plus two feeding ports, which can be connected to the pipeline to facilitate the connection of a variety of ingredients, with discharge below And install the plug valve, etc. After mixing well, rotate the handle of the plug valve 90 ° to discharge the material, and close it after discharging, to achieve the purpose of uniform mixing; can be equipped with a level gauge or weighing equipment to the material in the tank Volume or weight is measured. Online CIP cleaning (only for fully enclosed structures). Designed in accordance with sanitary requirements, the structure design is ** humanized and easy to operate. Smooth transmission and low noise. Appropriate diameter-to-height ratio design, customized mixing device as required, good mixing and mixing effect. The inner surface of the tank is mirror polished (roughness Ra≤0.4 & micro; m); the process openings of the inlet and outlet nozzles, sight glasses, manholes, etc. are welded with the arc transition of the welding process of the tank body, smooth and easy to clean No dead ends, ensuring the reliability and stability of the production process, and complying with the "cGMP" and other specifications. [Several types of ingredient tanks] Upper movable cover, lower inclined bottom structure, upper movable cover, lower cone bottom (or oval, butterfly head) structure, upper and lower tapered head structure (closed), upper and lower ellipse (or butterfly) ) Head knot [Main technical and structural performance of the batching tank] 1. Tank volume: 50L, 100L, 200L, 300L, 500L, 600L, 1000L ~ 5000L. 2. Heating method: The electric heating rod is inserted into the jacket, and the heating is even and there is no cold zone. Heat-conducting oil or water is injected into the jacket as a heating medium, which generates heat to heat the materials in the tank. 3. Material heating temperature: ≤350 ℃; material heating time: 20min ~ 90min (depending on the process needs). 4. Temperature control: Use a thermocouple to measure the temperature and connect it with a temperature controller to measure and control the temperature (temperature difference ± 1 ° C), and adjust the temperature of the material. The temperature controller is installed in the electric control box, and the temperature transmission rod is directly inserted into the bottom of the tank, so that the liquid can be used to indicate the temperature. 5. Tank body: The inner surface is mirror polished, and the roughness Ra≤0.4μm. 6. Upper cover: Two openable movable covers, easy to clean, mirror-polished inner and outer surfaces (roughness Ra≤0.4μm). 7. Internal tank bottom structure: It is processed into R angle by spinning, and there is no dead angle after welding and polishing with the internal tank body, and it is inclined at 5 ° toward the discharge port, which is convenient for discharging the materials without stagnation. 8. Jacket form: full jacket, used to add heat-conducting oil or water, to achieve the best temperature rise and cool down during work. 9. Insulation material: It is filled with pearl cotton, rock wool or polyurethane, which can keep the temperature difference with the outside world to achieve the effect of heat insulation. 10. Outer shell surface treatment: mirror-polished or 2B primary color matte or 2B matte surface. 11. Stirring device: the top center is stirred, and the reducer output shaft and the stirring paddle shaft are connected by a loose sleeve, which is convenient for disassembly and cleaning. 12. Stirring speed: 15 ~ 120r / min (constant speed); Type of stirring paddle: frame type, anchor type, paddle type, turbine type, etc. (according to process requirements). 13. Equipment configuration: electrical control box, thermometer, material liquid inlet and outlet, medium inlet and outlet (inlet and drain), vent (oil spill hole), etc. 14. Material: inner tank SUS304 or SUS316L; jacket is Q235-B or SUS304; outer protective shell is SUS304. 15. The process openings of the inlet and outlet pipe openings and the weld of the inner tank adopt a flanging process and arc transition , Smooth and easy to clean without dead ends, beautiful appearance. Capacity (L) 300L500L800L1000L Vacuum degree (MPa) <-0.09 <-0.09 <-0.09 <-0.09 Working pressure (MPa) Normal pressure and normal pressure Normal pressure and normal pressure Working temperature (℃) 0 ~ 1000 ~ 1000 ~ 1000 ~ 100 Motor Power (KW) 345.55.5 Stirring speed (r / min) 35-5135-5135-5135-51 Dimensions (mm) Φ1100 X2050Φ1200 X2390Φ1400 X2650Φ1500 X2750

Ingredients tank

The mixing tank is also known as the mixing tank and the mixing barrel. It has a three-layer structure with an upper opening and a lower inclined bottom. It has the functions of heating and automatic temperature control, heat preservation, and stirring. It has the advantages of fast heat transfer, large temperature difference, and convenient cleaning. . Widely used in food (dairy), pharmaceutical, daily chemical, beverage, oil, chemical, pigment and other industries as intermediate buffering, liquid storage, mixing, and blending equipment (under the condition that the material can be adjusted uniformly without heating, the equipment For * economical and practical), heating, mixing or sterilization. It is especially suitable for pilot and small-scale use of units and scientific research institutions without steam heat sources. According to the needs of the process, a fully enclosed structure and a thermal insulation structure can be adopted. [Feeding tank function] The liquid distribution tank is heated by steam in the jacket, and the heat is transferred to the material through the inner wall of the tank to maintain the required temperature. At the same time, the magnetic stirrer is used to continuously rotate the material to achieve the solution Mix evenly for the purpose. It has the characteristics of energy saving, corrosion resistance, strong production capacity, convenient cleaning, simple structure, etc. It is an indispensable device for manufacturing dairy, beverage and pharmaceutical manufacturers. The structure of the batching tank This equipment consists of a tank body, a jacket, an inner liner, a head, a magnetic stirring device and a public system pipeline. The main material is imported stainless steel, which is carried out in accordance with the technical conditions of GB741-80. The tank is polished inside and outside. There are stirring paddles in the tank, which play the role of stirring during operation. The thermometer is on the cover to display the temperature inside the tank. , Drive the stirring paddle; can be disassembled and cleaned, and is an openable tank lid for cleaning, plus two feeding ports, which can be connected to the pipeline to facilitate the connection of a variety of ingredients, with discharge below And install the plug valve, etc. After mixing well, rotate the handle of the plug valve 90 ° to discharge the material, and close it after discharging, to achieve the purpose of uniform mixing; can be equipped with a level gauge or weighing equipment to the material in the tank Volume or weight is measured. Online CIP cleaning (only for fully enclosed structures). Designed in accordance with sanitary requirements, the structure design is ** humanized and easy to operate. Smooth transmission and low noise. Appropriate diameter-to-height ratio design, customized mixing device as required, good mixing and mixing effect. The inner surface of the tank is mirror polished (roughness Ra≤0.4 & micro; m); the process openings of the inlet and outlet nozzles, sight glasses, manholes, etc. are welded with the arc transition of the welding process of the tank body, which is smooth and easy to clean. No dead ends, ensuring the reliability and stability of the production process, and complying with the "cGMP" and other specifications. [Several types of ingredient tanks] Upper movable cover, lower inclined bottom structure, upper movable cover, lower cone bottom (or oval, butterfly head) structure, upper and lower tapered head structure (closed), upper and lower ellipse (or butterfly) ) Head knot [Main technical and structural performance of the batching tank] 1. Tank volume: 50L, 100L, 200L, 300L, 500L, 600L, 1000L ~ 5000L. 2. Heating method: The electric heating rod is inserted into the jacket, and the heating is even and there is no cold zone. Heat-conducting oil or water is injected into the jacket as a heating medium, which generates heat to heat the materials in the tank. 3. Material heating temperature: ≤350 ℃; material heating time: 20min ~ 90min (depending on the process needs). 4. Temperature control: Use a thermocouple to measure the temperature and connect it with a temperature controller to measure and control the temperature (temperature difference ± 1 ° C), and adjust the temperature of the material. The temperature controller is installed in the electric control box, and the temperature transmission rod is directly inserted into the bottom of the tank, so that the liquid can be used to indicate the temperature. 5. Tank body: The inner surface is mirror polished, and the roughness Ra≤0.4μm. 6. Upper cover: Two openable movable covers, easy to clean, mirror-polished inner and outer surfaces (roughness Ra≤0.4μm). 7. Internal tank bottom structure: It is processed into R angle by spinning, and there is no dead angle after welding and polishing with the internal tank body, and it is inclined at 5 ° toward the discharge port, which is convenient for discharging the materials without stagnation. 8. Jacket form: full jacket, used to add heat-conducting oil or water, to achieve the best temperature rise and cool down during work. 9. Insulation material: It is filled with pearl cotton, rock wool or polyurethane, which can keep the temperature difference with the outside world to achieve the effect of heat insulation. 10. Outer shell surface treatment: mirror-polished or 2B primary color matte or 2B matte surface. 11. Stirring device: the top center is stirred, and the reducer output shaft and the stirring paddle shaft are connected by a loose sleeve, which is convenient for disassembly and cleaning. 12. Stirring speed: 15 ~ 120r / min (constant speed); Type of stirring paddle: frame type, anchor type, paddle type, turbine type, etc. (according to process requirements). 13. Equipment configuration: electrical control box, thermometer, material liquid inlet and outlet, medium inlet and outlet (inlet and drain), vent (oil spill hole), etc. 14. Material: inner tank SUS304 or SUS316L; jacket is Q235-B or SUS304; outer protective shell is SUS304. 15. The process openings of the inlet and outlet pipe openings and the weld of the inner tank adopt a flanging process and arc transition , Smooth and easy to clean without dead ends, beautiful appearance. Capacity (L) 300L500L800L1000L Vacuum degree (MPa) <-0.09 <-0.09 <-0.09 <-0.09 Working pressure (MPa) Normal pressure and normal pressure Normal pressure and normal pressure Working temperature (℃) 0 ~ 1000 ~ 1000 ~ 1000 ~ 100 Motor Power (KW) 345.55.5 Stirring speed (r / min) 35-5135-5135-5135-51 Dimensions (mm) Φ1100 X2050Φ1200 X2390Φ1400 X2650Φ1500 X2750

Blending tank

The mixing tank is also known as the mixing tank and the mixing barrel. It has a three-layer structure with an upper opening and a lower inclined bottom. It has the functions of heating and automatic temperature control, heat preservation, and stirring. It has the advantages of fast heat transfer, large temperature difference, and convenient cleaning. . Widely used in food (dairy), pharmaceutical, daily chemical, beverage, oil, chemical, pigment and other industries as intermediate buffering, liquid storage, mixing, and blending equipment (under the condition that the material can be adjusted uniformly without heating, the equipment For the most economical and practical), heating, mixing or sterilization. It is especially suitable for pilot and small-scale use of units and scientific research institutions without steam heat sources. According to the needs of the process, a fully enclosed structure and a thermal insulation structure can be adopted. [Feeding tank function] The liquid distribution tank is heated by steam in the jacket, and the heat is transferred to the material through the inner wall of the tank to maintain the required temperature. At the same time, the magnetic stirrer is used to continuously rotate the material to achieve the medicinal solution. Mix evenly for the purpose. It has the characteristics of energy saving, corrosion resistance, strong production capacity, convenient cleaning, simple structure, etc. It is an indispensable device for manufacturing dairy, beverage and pharmaceutical manufacturers. The structure of the batching tank This equipment consists of a tank body, a jacket, an inner liner, a head, a magnetic stirring device and a public system pipeline. The main material is imported stainless steel, which is carried out in accordance with the technical conditions of GB741-80. The tank is polished inside and outside. There are stirring paddles in the tank, which play the role of stirring during operation. The thermometer is on the cover to display the temperature inside the tank. , Drive the stirring paddle; can be disassembled and cleaned, and is an openable tank lid for cleaning, plus two feeding ports, which can be connected to the pipeline to facilitate the connection of a variety of ingredients, with discharge below And install the plug valve, etc. After mixing well, rotate the handle of the plug valve 90 ° to discharge the material, and close it after discharging, to achieve the purpose of uniform mixing; can be equipped with a level gauge or weighing equipment to the material in the tank Volume or weight is measured. Online CIP cleaning (only for fully enclosed structures). Designed in accordance with sanitary requirements, the structure design is ** humanized and easy to operate. Smooth transmission and low noise. Appropriate diameter-to-height ratio design, customized mixing device as required, good mixing and mixing effect. The inner surface of the tank is mirror polished (roughness Ra≤0.4 & micro; m); the process openings of the inlet and outlet nozzles, sight glasses, manholes, etc. are welded with the arc transition of the welding process of the tank body, smooth and easy to clean No dead ends, ensuring the reliability and stability of the production process, and complying with the "cGMP" and other specifications. [Several types of ingredient tanks] Upper movable cover, lower inclined bottom structure, upper movable cover, lower cone bottom (or oval, butterfly head) structure, upper and lower tapered head structure (closed), upper and lower ellipse (or butterfly) ) Head knot [Main technical and structural performance of the batching tank] 1. Tank volume: 50L, 100L, 200L, 300L, 500L, 600L, 1000L ~ 5000L. 2. Heating method: The electric heating rod is inserted into the jacket, and the heating is even and there is no cold zone. Heat-conducting oil or water is injected into the jacket as a heating medium, which generates heat to heat the materials in the tank. 3. Material heating temperature: ≤350 ℃; material heating time: 20min ~ 90min (depending on the process needs). 4. Temperature control: Use a thermocouple to measure the temperature and connect it with a temperature controller to measure and control the temperature (temperature difference ± 1 ° C), and adjust the temperature of the material. The temperature controller is installed in the electric control box, and the temperature transmission rod is directly inserted into the bottom of the tank, so that the liquid can be used to indicate the temperature. 5. Tank body: The inner surface is mirror polished, and the roughness Ra≤0.4μm. 6. Upper cover: Two openable movable covers, easy to clean, mirror-polished inner and outer surfaces (roughness Ra≤0.4μm). 7. Internal tank bottom structure: It is processed into R angle by spinning, and there is no dead angle after welding and polishing with the internal tank body, and it is inclined at 5 ° toward the discharge port, which is convenient for discharging the materials without stagnation. 8. Jacket form: full jacket, used to add heat-conducting oil or water, so as to achieve the purpose of heating and cooling. 9. Insulation material: It is filled with pearl cotton, rock wool or polyurethane, which can keep the temperature difference with the outside world to achieve the effect of heat insulation. 10. Outer shell surface treatment: mirror-polished or 2B primary color matte or 2B matte surface. 11. Stirring device: the top center is stirred, and the reducer output shaft and the stirring paddle shaft are connected by a loose sleeve, which is convenient for disassembly and cleaning. 12. Stirring speed: 15 ~ 120r / min (constant speed); Type of stirring paddle: frame type, anchor type, paddle type, turbine type, etc. (according to process requirements). 13. Equipment configuration: electrical control box, thermometer, material liquid inlet and outlet, medium inlet and outlet (inlet and drain), vent (oil spill hole), etc. 14. Material: inner tank SUS304 or SUS316L; jacket is Q235-B or SUS304; outer protective shell is SUS304. 15. The process openings of the inlet and outlet pipe openings and the weld of the inner tank adopt a flanging process and arc transition. , Smooth and easy to clean without dead ends, beautiful appearance. Capacity (L) 300L500L800L1000L Vacuum degree (MPa) <-0.09 <-0.09 <-0.09 <-0.09 Working pressure (MPa) Normal pressure and normal pressure Normal pressure and normal pressure Working temperature (℃) 0 ~ 1000 ~ 1000 ~ 1000 ~ 100 Motor Power (KW) 345.55.5 Stirring speed (r / min) 35-5135-5135-5135-51 Dimensions (mm) Φ1100 X2050Φ1200 X2390Φ1400 X2650Φ1500 X2750

Ingredients tank

The mixing tank is also known as the mixing tank and the mixing barrel. It has a three-layer structure with an upper opening and a lower inclined bottom. It has the functions of heating and automatic temperature control, heat preservation, and stirring. It has the advantages of fast heat transfer, large temperature difference, and convenient cleaning. . Widely used in food (dairy), pharmaceutical, daily chemical, beverage, oil, chemical, pigment and other industries as intermediate buffering, liquid storage, mixing, and blending equipment (under the condition that the material can be adjusted uniformly without heating, the equipment For * economical and practical), heating, mixing or sterilization. It is especially suitable for pilot and small-scale use of units and scientific research institutions without steam heat sources. According to the needs of the process, a fully enclosed structure and a thermal insulation structure can be adopted. [Feeding tank function] The liquid distribution tank is heated by steam in the jacket, and the heat is transferred to the material through the inner wall of the tank to maintain the required temperature. At the same time, the magnetic stirrer is used to continuously rotate the material to achieve the medicinal solution. Mix evenly for the purpose. It has the characteristics of energy saving, corrosion resistance, strong production capacity, convenient cleaning, simple structure, etc. It is an indispensable device for manufacturing dairy, beverage and pharmaceutical manufacturers. The structure of the batching tank This equipment consists of a tank body, a jacket, an inner liner, a head, a magnetic stirring device and a public system pipeline. The main material is imported stainless steel, which is carried out in accordance with the technical conditions of GB741-80. The tank is polished inside and outside. There are stirring paddles in the tank, which play the role of stirring during operation. The thermometer is on the cover to display the temperature inside the tank. , Drive the stirring paddle; can be disassembled and cleaned, and is an openable tank lid for cleaning, plus two feeding ports, which can be connected to the pipeline to facilitate the connection of a variety of ingredients, with discharge below And install the plug valve, etc. After mixing well, rotate the handle of the plug valve 90 ° to discharge the material, and close it after discharging, to achieve the purpose of uniform mixing; can be equipped with a level gauge or weighing equipment to the material in the tank Volume or weight is measured. Online CIP cleaning (only for fully enclosed structures). Designed in accordance with sanitary requirements, the structure design is ** humanized and easy to operate. Smooth transmission and low noise. Appropriate diameter-to-height ratio design, customized mixing device as required, good mixing and mixing effect. The inner surface of the tank is mirror polished (roughness Ra≤0.4 & micro; m); the process openings of the inlet and outlet nozzles, sight glasses, manholes, etc. are welded with the arc transition of the welding process of the tank body, which is smooth and easy to clean. No dead ends, ensuring the reliability and stability of the production process, and complying with the "cGMP" and other specifications. [Several types of ingredient tanks] Upper movable cover, lower inclined bottom structure, upper movable cover, lower cone bottom (or oval, butterfly head) structure, upper and lower tapered head structure (closed), upper and lower ellipse (or butterfly) ) Head knot [Main technical and structural performance of the batching tank] 1. Tank volume: 50L, 100L, 200L, 300L, 500L, 600L, 1000L ~ 5000L. 2. Heating method: The electric heating rod is inserted into the jacket, and the heating is even and there is no cold zone. Heat-conducting oil or water is injected into the jacket as a heating medium, which generates heat to heat the materials in the tank. 3. Material heating temperature: ≤350 ℃; material heating time: 20min ~ 90min (depending on the process needs). 4. Temperature control: Use a thermocouple to measure the temperature and connect it with a temperature controller to measure and control the temperature (temperature difference ± 1 ° C), and adjust the temperature of the material. The temperature controller is installed in the electric control box, and the temperature transmission rod is directly inserted into the bottom of the tank, so that the liquid can be used to indicate the temperature. 5. Tank body: The inner surface is mirror polished, and the roughness Ra≤0.4μm. 6. Upper cover: Two openable movable covers, easy to clean, mirror-polished inner and outer surfaces (roughness Ra≤0.4μm). 7. Internal tank bottom structure: It is processed into R angle by spinning, and there is no dead angle after welding and polishing with the internal tank body, and it is inclined at 5 ° toward the discharge port, which is convenient for discharging the materials without stagnation. 8. Jacket form: full jacket, used to add heat-conducting oil or water, to achieve the best temperature rise and cool down during work. 9. Insulation material: It is filled with pearl cotton, rock wool or polyurethane, which can keep the temperature difference with the outside world to achieve the effect of heat insulation. 10. Outer shell surface treatment: mirror-polished or 2B primary color matte or 2B matte surface. 11. Stirring device: the top center is stirred, and the reducer output shaft and the stirring paddle shaft are connected by a loose sleeve, which is convenient for disassembly and cleaning. 12. Stirring speed: 15 ~ 120r / min (constant speed); Type of stirring paddle: frame type, anchor type, paddle type, turbine type, etc. (according to process requirements). 13. Equipment configuration: electrical control box, thermometer, material liquid inlet and outlet, medium inlet and outlet (inlet and drain), vent (oil spill hole), etc. 14. Material: inner tank SUS304 or SUS316L; jacket is Q235-B or SUS304; outer protective shell is SUS304. 15. The process openings of the inlet and outlet pipe openings and the weld of the inner tank adopt a flanging process and arc transition , Smooth and easy to clean without dead ends, beautiful appearance. Capacity (L) 300L500L800L1000L Vacuum degree (MPa) <-0.09 <-0.09 <-0.09 <-0.09 Working pressure (MPa) Normal pressure and normal pressure Normal pressure and normal pressure Working temperature (℃) 0 ~ 1000 ~ 1000 ~ 1000 ~ 100 Motor Power (KW) 345.55.5 Stirring speed (r / min) 35-5135-5135-5135-51 Dimensions (mm) Φ1100 X2050Φ1200 X2390Φ1400 X2650Φ1500 X2750

Blending tank

The mixing tank is also known as the mixing tank and the mixing barrel. It has a three-layer structure with an upper opening and a lower inclined bottom. It has the functions of heating and automatic temperature control, heat preservation, and mixing; fast heat transfer, large temperature difference, and convenient cleaning . Widely used in food (dairy), pharmaceutical, daily chemical, beverage, oil, chemical, pigment and other industries as intermediate buffering, liquid storage, mixing, and blending equipment (under the condition that the material can be adjusted uniformly without heating, the equipment For * economical and practical), heating, mixing or sterilization. It is especially suitable for pilot and small-scale use of units and scientific research institutions without steam heat sources. According to the needs of the process, a fully enclosed structure and a thermal insulation structure can be adopted. [Feeding tank function] The liquid distribution tank is heated by steam in the jacket, and the heat is transferred to the material through the inner wall of the tank to maintain the required temperature. At the same time, the magnetic stirrer is used to continuously rotate the material to achieve the solution Mix evenly for the purpose. It has the characteristics of energy saving, corrosion resistance, strong production capacity, convenient cleaning, simple structure, etc. It is an indispensable device for manufacturing dairy, beverage and pharmaceutical manufacturers. The structure of the batching tank This equipment consists of a tank body, a jacket, an inner liner, a head, a magnetic stirring device and a public system pipeline. The main material is imported stainless steel, which is carried out in accordance with the technical conditions of GB741-80. The tank is polished inside and outside. There are stirring paddles in the tank, which play the role of stirring during operation. The thermometer is on the cover to display the temperature inside the tank. , Drive the stirring paddle; can be disassembled and cleaned, and is an openable tank lid for cleaning, plus two feeding ports, which can be connected to the pipeline to facilitate the connection of a variety of ingredients, with discharge below And install the plug valve, etc. After mixing well, rotate the handle of the plug valve 90 ° to discharge the material, and close it after discharging, to achieve the purpose of uniform mixing; can be equipped with a level gauge or weighing equipment to the material in the tank Volume or weight is measured. Online CIP cleaning (only for fully enclosed structures). Designed in accordance with sanitary requirements, the structure design is ** humanized and easy to operate. Smooth transmission and low noise. Appropriate diameter-to-height ratio design, customized mixing device as required, good mixing and mixing effect. The inner surface of the tank is mirror polished (roughness Ra≤0.4 & micro; m); the process openings of the inlet and outlet nozzles, sight glasses, manholes, etc. are welded with the arc transition of the welding process of the tank body, which is smooth and easy to clean. No dead ends, ensuring the reliability and stability of the production process, and complying with the "cGMP" and other specifications. [Several types of ingredient tanks] Upper movable cover, lower inclined bottom structure, upper movable cover, lower cone bottom (or oval, butterfly head) structure, upper and lower tapered head structure (closed), upper and lower ellipse (or butterfly) ) Head knot [Main technical and structural performance of the batching tank] 1. Tank volume: 50L, 100L, 200L, 300L, 500L, 600L, 1000L ~ 5000L. 2. Heating method: The electric heating rod is inserted into the jacket, and the heating is even and there is no cold zone. Heat-conducting oil or water is injected into the jacket as a heating medium, which generates heat to heat the materials in the tank. 3. Material heating temperature: ≤350 ℃; material heating time: 20min ~ 90min (depending on the process needs). 4. Temperature control: Use a thermocouple to measure the temperature and connect it with a temperature controller to measure and control the temperature (temperature difference ± 1 ° C), and adjust the temperature of the material. The temperature controller is installed in the electric control box, and the temperature transmission rod is directly inserted into the bottom of the tank, so that the liquid can be used to indicate the temperature. 5. Tank body: The inner surface is mirror polished, and the roughness Ra≤0.4μm. 6. Upper cover: Two openable movable covers, easy to clean, mirror-polished inner and outer surfaces (roughness Ra≤0.4μm). 7. Internal tank bottom structure: It is processed into R angle by spinning, and there is no dead angle after welding and polishing with the internal tank body, and it is inclined at 5 ° toward the discharge port, which is convenient for discharging the materials without stagnation. 8. Jacket form: full jacket, used to add heat-conducting oil or water, to achieve the best temperature rise and cool down during work. 9. Insulation material: It is filled with pearl cotton, rock wool or polyurethane, which can keep the temperature difference with the outside world to achieve the effect of heat insulation. 10. Outer shell surface treatment: mirror-polished or 2B primary color matte or 2B matte surface. 11. Stirring device: the top center is stirred, and the reducer output shaft and the stirring paddle shaft are connected by a loose sleeve, which is convenient for disassembly and cleaning. 12. Stirring speed: 15 ~ 120r / min (constant speed); Type of stirring paddle: frame type, anchor type, paddle type, turbine type, etc. (according to process requirements). 13. Equipment configuration: electrical control box, thermometer, material liquid inlet and outlet, medium inlet and outlet (inlet and drain), vent (oil spill hole), etc. 14. Material: inner tank SUS304 or SUS316L; jacket is Q235-B or SUS304; outer protective shell is SUS304. 15. The process openings of the inlet and outlet pipe openings and the weld of the inner tank adopt a flanging process and arc transition , Smooth and easy to clean without dead ends, beautiful appearance. Capacity (L) 300L500L800L1000L Vacuum degree (MPa) <-0.09 <-0.09 <-0.09 <-0.09 Working pressure (MPa) Normal pressure and normal pressure Normal pressure and normal pressure Working temperature (℃) 0 ~ 1000 ~ 1000 ~ 1000 ~ 100 Motor Power (KW) 345.55.5 Stirring speed (r / min) 35-5135-5135-5135-51 Dimensions (mm) Φ1100 X2050Φ1200 X2390Φ1400 X2650Φ1500 X2750

Aseptic tank

The mixing tank is also known as the mixing tank and the mixing barrel. It has a three-layer structure with an upper opening and a lower inclined bottom. It has the functions of heating and automatic temperature control, heat preservation, and stirring. It has the advantages of fast heat transfer, large temperature difference, and convenient cleaning. . Widely used in food (dairy), pharmaceutical, daily chemical, beverage, oil, chemical, pigment and other industries as intermediate buffering, liquid storage, mixing, and blending equipment (under the condition that the material can be adjusted uniformly without heating, the equipment For * economical and practical), heating, mixing or sterilization. It is especially suitable for pilot and small-scale use of units and scientific research institutions without steam heat sources. According to the needs of the process, a fully enclosed structure and a thermal insulation structure can be adopted. [Feeding tank function] The liquid distribution tank is heated by steam in the jacket, and the heat is transferred to the material through the inner wall of the tank to maintain the required temperature. At the same time, the magnetic stirrer is used to continuously rotate the material to achieve the medicinal solution. Mix evenly for the purpose. It has the characteristics of energy saving, corrosion resistance, strong production capacity, convenient cleaning, simple structure, etc. It is an indispensable device for manufacturing dairy, beverage and pharmaceutical manufacturers. The structure of the batching tank This equipment consists of a tank body, a jacket, an inner liner, a head, a magnetic stirring device and a public system pipeline. The main material is imported stainless steel, which is carried out in accordance with the technical conditions of GB741-80. The tank is polished inside and outside. There are stirring paddles in the tank, which play the role of stirring during operation. The thermometer is on the cover to display the temperature inside the tank. , Drive the stirring paddle; can be disassembled and cleaned, and is an openable tank lid for cleaning, plus two feeding ports, which can be connected to the pipeline to facilitate the connection of a variety of ingredients, with discharge below And install the plug valve, etc. After mixing well, rotate the handle of the plug valve 90 ° to discharge the material, and close it after discharging, to achieve the purpose of uniform mixing; can be equipped with a level gauge or weighing equipment to the material in the tank Volume or weight is measured. Online CIP cleaning (only for fully enclosed structures). Designed in accordance with sanitary requirements, the structure design is ** humanized and easy to operate. Smooth transmission and low noise. Appropriate diameter-to-height ratio design, customized mixing device as required, good mixing and mixing effect. The inner surface of the tank is mirror polished (roughness Ra≤0.4 & micro; m); the process openings of the inlet and outlet nozzles, sight glasses, manholes, etc. are welded with the arc transition of the welding process of the tank body, which is smooth and easy to clean. No dead ends, ensuring the reliability and stability of the production process, and complying with the "cGMP" and other specifications. [Several types of ingredient tanks] Upper movable cover, lower inclined bottom structure, upper movable cover, lower cone bottom (or oval, butterfly head) structure, upper and lower tapered head structure (closed), upper and lower ellipse (or butterfly) ) Head knot [Main technical and structural performance of the batching tank] 1. Tank volume: 50L, 100L, 200L, 300L, 500L, 600L, 1000L ~ 5000L. 2. Heating method: The electric heating rod is inserted into the jacket, and the heating is even and there is no cold zone. Heat-conducting oil or water is injected into the jacket as a heating medium, which generates heat to heat the materials in the tank. 3. Material heating temperature: ≤350 ℃; material heating time: 20min ~ 90min (depending on the process needs). 4. Temperature control: Use a thermocouple to measure the temperature and connect it with a temperature controller to measure and control the temperature (temperature difference ± 1 ° C), and adjust the temperature of the material. The temperature controller is installed in the electric control box, and the temperature transmission rod is directly inserted into the bottom of the tank, so that the liquid can be used to indicate the temperature. 5. Tank body: The inner surface is mirror polished, and the roughness Ra≤0.4μm. 6. Upper cover: Two openable movable covers, easy to clean, mirror-polished inner and outer surfaces (roughness Ra≤0.4μm). 7. Internal tank bottom structure: It is processed into R angle by spinning, and there is no dead angle after welding and polishing with the internal tank body, and it is inclined at 5 ° toward the discharge port, which is convenient for discharging the materials without stagnation. 8. Jacket form: full jacket, used to add heat-conducting oil or water, to achieve the best temperature rise and cool down during work. 9. Insulation material: It is filled with pearl cotton, rock wool or polyurethane, which can keep the temperature difference with the outside world to achieve the effect of heat insulation. 10. Outer shell surface treatment: mirror-polished or 2B primary color matte or 2B matte surface. 11. Stirring device: the top center is stirred, and the reducer output shaft and the stirring paddle shaft are connected by a loose sleeve, which is convenient for disassembly and cleaning. 12. Stirring speed: 15 ~ 120r / min (constant speed); Type of stirring paddle: frame type, anchor type, paddle type, turbine type, etc. (according to process requirements). 13. Equipment configuration: electrical control box, thermometer, material liquid inlet and outlet, medium inlet and outlet (inlet and drain), vent (oil spill hole), etc. 14. Material: inner tank SUS304 or SUS316L; jacket is Q235-B or SUS304; outer protective shell is SUS304. 15. The process openings of the inlet and outlet pipe openings and the weld of the inner tank adopt a flanging process and arc transition. , Smooth and easy to clean without dead ends, beautiful appearance. Capacity (L) 300L500L800L1000L Vacuum degree (MPa) <-0.09 <-0.09 <-0.09 <-0.09 Working pressure (MPa) Normal pressure and normal pressure Normal pressure and normal pressure Working temperature (℃) 0 ~ 1000 ~ 1000 ~ 1000 ~ 100 Motor Power (KW) 345.55.5 Stirring speed (r / min) 35-5135-5135-5135-51 Dimensions (mm) Φ1100 X2050Φ1200 X2390Φ1400 X2650Φ1500 X2750

Ingredients tank

The mixing tank is also known as the mixing tank and the mixing barrel. It has a three-layer structure with an upper opening and a lower inclined bottom. It has the functions of heating and automatic temperature control, heat preservation, and stirring. It has the advantages of fast heat transfer, large temperature difference, and convenient cleaning. . Widely used in food (dairy), pharmaceutical, daily chemical, beverage, oil, chemical, pigment and other industries as intermediate buffering, liquid storage, mixing, and blending equipment (under the condition that the material can be adjusted uniformly without heating, the equipment For the most economical and practical), heating, mixing or sterilization. It is especially suitable for pilot and small-scale use of units and scientific research institutions without steam heat sources. According to the needs of the process, a fully enclosed structure and a thermal insulation structure can be adopted. [Dosing tank function] The liquid distribution tank is heated by steam in the jacket, and the heat is transferred to the material through the inner wall of the tank to maintain the required temperature. Mix evenly for the purpose. It has the characteristics of energy saving, corrosion resistance, strong production capacity, convenient cleaning, simple structure, etc. It is an indispensable device for manufacturing dairy, beverage and pharmaceutical manufacturers. The structure of the batching tank This equipment consists of a tank body, a jacket, an inner liner, a head, a magnetic stirring device and a public system pipeline. The main material is imported stainless steel, which is carried out in accordance with the technical conditions of GB741-80. The tank is polished inside and outside. There are stirring paddles in the tank, which play the role of stirring during operation. , Drive the stirring paddle; can be disassembled and cleaned, and is an openable tank lid for cleaning, plus two feeding ports, which can be connected to the pipeline to facilitate the connection of a variety of ingredients, with discharge below And install the plug valve, etc. After mixing well, rotate the handle of the plug valve 90 ° to discharge the material, and close it after discharging, to achieve the purpose of uniform mixing; can be equipped with a level gauge or weighing equipment to the material in the tank Volume or weight is measured. Online CIP cleaning (only for fully enclosed structures). Designed in accordance with sanitary requirements, the structure design is ** humanized and easy to operate. Smooth transmission and low noise. Appropriate diameter-to-height ratio design, customized mixing device as required, good mixing and mixing effect. The inner surface of the tank is mirror polished (roughness Ra≤0.4 & micro; m); the process openings of the inlet and outlet nozzles, sight glasses, manholes, etc. are welded with the arc transition of the welding process of the tank body, which is smooth and easy to clean. No dead ends, ensuring the reliability and stability of the production process, and complying with the "cGMP" and other specifications. [Several types of ingredient tanks] Upper movable cover, lower inclined bottom structure, upper movable cover, lower cone bottom (or oval, butterfly head) structure, upper and lower tapered head structure (closed), upper and lower ellipse (or butterfly) ) Head knot [Main technical and structural performance of the batching tank] 1. Tank volume: 50L, 100L, 200L, 300L, 500L, 600L, 1000L ~ 5000L. 2. Heating method: The electric heating rod is inserted into the jacket, and the heating is even and there is no cold zone. Heat-conducting oil or water is injected into the jacket as a heating medium, which generates heat to heat the materials in the tank. 3. Material heating temperature: ≤350 ℃; material heating time: 20min ~ 90min (depending on the process needs). 4. Temperature control: Use a thermocouple to measure the temperature and connect it with a temperature controller to measure and control the temperature (temperature difference ± 1 ° C), and adjust the temperature of the material. The temperature controller is installed in the electric control box, and the temperature transmission rod is directly inserted into the bottom of the tank, so that the liquid can be used to indicate the temperature. 5. Tank body: The inner surface is mirror polished, and the roughness Ra≤0.4μm. 6. Upper cover: Two openable movable covers, easy to clean, mirror-polished inner and outer surfaces (roughness Ra≤0.4μm). 7. Internal tank bottom structure: It is processed into R angle by spinning, and there is no dead angle after welding and polishing with the internal tank body, and it is inclined at 5 ° toward the discharge port, which is convenient for discharging the materials without stagnation. 8. Jacket form: full jacket, used to add heat-conducting oil or water, so as to achieve the purpose of heating and cooling. 9. Insulation material: It is filled with pearl cotton, rock wool or polyurethane, which can keep the temperature difference with the outside world to achieve the effect of heat insulation. 10. Outer shell surface treatment: mirror-polished or 2B primary color matte or 2B matte surface. 11. Stirring device: the top center is stirred, and the reducer output shaft and the stirring paddle shaft are connected by a loose sleeve, which is convenient for disassembly and cleaning. 12. Stirring speed: 15 ~ 120r / min (constant speed); Type of stirring paddle: frame type, anchor type, paddle type, turbine type, etc. (according to process requirements). 13. Equipment configuration: electrical control box, thermometer, material liquid inlet and outlet, medium inlet and outlet (inlet and drain), vent (oil spill hole), etc. 14. Material: inner tank SUS304 or SUS316L; jacket is Q235-B or SUS304; outer protective shell is SUS304. 15. The process openings of the inlet and outlet pipe openings and the weld of the inner tank adopt a flanging process and arc transition. , Smooth and easy to clean without dead ends, beautiful appearance. Capacity (L) 300L500L800L1000L Vacuum degree (MPa) <-0.09 <-0.09 <-0.09 <-0.09 Working pressure (MPa) Normal pressure and normal pressure Normal pressure and normal pressure Working temperature (℃) 0 ~ 1000 ~ 1000 ~ 1000 ~ 100 Motor Power (KW) 345.55.5 Stirring speed (r / min) 35-5135-5135-5135-51 Dimensions (mm) Φ1100 X2050Φ1200 X2390Φ1400 X2650Φ1500 X2750

  • QQ Consulting
  • QQ QQ
  • QQ QQ
  • Telephone consultation
  • 17321252705
  • 15079107852
  • 15800450161
  • 021-58447276
  • 021-58420116