Definition of emulsification tank: The role of an emulsification tank is to dissolve one or more materials (water-soluble solid phase, liquid phase or gelatin, etc.) in another liquid phase and synthesize its water into a relatively stable emulsion. It is widely used in the emulsification and mixing of raw and auxiliary materials such as edible oils, powders, sugars, etc. Some coatings and paints are also emulsified and dispersed, and they are especially suitable for some difficult-sol-like additives such as CMC and xanthan gum. Scope of application: The high-speed rotating shearing wheel of the high-shear emulsifying machine and the stationary shearing wheel are used to fully and rapidly mix, emulsify, and homogenize the mixed liquid and the mixture in the tank. Widely used in food (dairy), beverage, bioengineering, pharmaceutical, fine chemical, pigment and other industries, which greatly improves production efficiency and material quality, especially for hardly soluble additives such as CMC, gums, powders, etc. Better results. The equipment structure can adopt a variety of structural forms such as single layer, with insulation, with jacket (heating, cooling) according to the needs of the process. Product advantages: 1. Online CIP cleaning, SIP sterilization (121 ℃ / 0.1MPa). 2. Designed in accordance with sanitary requirements, structural design is ** humanized and easy to operate. Smooth transmission and low noise. 3. Appropriate diameter-to-height ratio design, energy saving, fast mixing of materials, high emulsification and homogenizing efficiency. 4. The inner tank surface is mirror polished (roughness Ra≤0.6μm); the process openings of the inlet and outlet nozzles, sight glasses, manholes, etc. are welded to the inner tank with a stretched flanging process and a smooth arc transition. Easy to clean without dead corners, ensuring the reliability and stability of the production process, and meeting the requirements of "cGMP" and other specifications. Technical parameters: Nominal volume of 1000L inner tank diameter (mm) 1000 heat exchange area (m2) 1.5 shearing power (kW) 5 shearing speed (r / min) 2800 working pressure (MPa) jacket: 0.08 ～ 0.6MPa, Inner tank: normal pressure to 0.5MPa Working temperature (℃) Jacket: <160 ℃, inner tank: <150 ℃ Equipment material Inner tank: stainless steel SUS304 or SUS316L; jacket SUS304 or Q235-B; outer finish Tube SUS304. Vessel category According to the design pressure and the characteristics of the medium, it is classified into atmospheric pressure vessels and pressure vessels. Working principle: The centrifugal high-speed emulsification head can generate a huge rotary suction force when it is working. It sucks and rotates the material directly above the rotor, and then throws it to the stator at high speed. After high-speed shearing, collision, and crushing between the rotors, the material Gather to the outlet and spray. At the same time, the anti-eddy current baffle at the bottom of the tank converts the rotation force into up and down force, so that the materials in the tank are evenly mixed, and the powder is prevented from agglomerating on the liquid surface, thereby achieving the purpose of hydration and emulsification. The equipment has an open-top container, which uses a mixer and a high-shear emulsifier to mix and emulsify, so that the materials can be completed in a continuous heating state, with simple process and high efficiency. The mixer can disperse, mix and emulsify the materials in a certain time to achieve the desired effect. The production process is all completed in a closed condition, and its process requirements, at the same time, recycling, emulsification, homogenization, and miniaturization of materials. Easy to discharge. WRL type homogeneous emulsification machine can open the valve and close the valve at the same time under working condition, which can discharge material, saving time and effort. Note: 1. The safety lock is forbidden to open the cover by mistake under vacuum. 2. If the upper cover and the container are not perfectly aligned, and the tightness is not enough, stop using it. 3. If the upper cover is not fully raised, the dump function is disabled. 4. When the upper cover is opened, the mixing and homogenizing motor and the vacuum pump are disabled.